500-920 Online Practice Questions and Answers

Which are two Application Gateways primary roles? (Choose two ) A. Manage configuration changes during FSM transitions

B. Communicate with virtual machines and report health and state

C. Automate updates to the XML Database

D. Communicate with end points and report their health and state

E. Manage configuration changes made with UCS Manager

Which Cisco UCS internal component maintains the UCS XML database, manages the FSM stages and operations and instructs the Application Gateway to perform operations on physical and logical elements?

A. Cisco Data Management Engine

B. Cisco UCS Manager

C. Cisco Application Gateways

D. Cisco Finite State Machine

When troubleshooting UCS initialization issues that require Fabric Interconnect reboots, which Fabric Interconnect should be rebooted first?

A. The primary Fabric Interconnect

B. Both Fabric Interconnects must be rebooted simultaneously

C. The Cisco UCS Manager will determine with Fabric Interconnect to reboot

D. The subordinate Fabric Interconnect

You are in the process of upgrading your UCS M3 Server to a newer UCS M4 Server. You associate the Service Profile to the new UCS Server, but it fails to boot You suspect of a failed boot hard drive. You check your RAID1 Boot LUN in UCS Manager, but see no error messages

What could be causing the issue?

A. The newer Cisco UCS M4 Server is using flash drives, not hard drives

B. The newer Cisco UCS M4 Server is using disks of larger capacity than the previous UCS M3 Server

C. A misconfiguration on the Service Profile Local Boot Policy

D. A misconfiguration on the Service Profile Local Disk Policy

When configuring UCS SAN Connectivity to a 3rd Party FibreChannel Storage Array that is connecting directly to the UCS Fabric Interconnects, which option is Cisco recommended'?

A. Connect the Storage Array to a RC Storage Port and Enable NPV Mode on the UCS Fabric Interconnects

B. Connect the Storage Array to an Appliance Port and Enable NPV Mode on the UCS Fabric Interconnects

C. Direct connectivity between UCS Fabric Interconnects and FibreChannel Storage Arrays is not supported

D. Connect the Storage Array to a FC Storage Port and Enable Switching Mode on the UCS Fabric Interconnects

E. Connect the Storage Array to an Appliance Port and Enable Switching Mode on the UCS Fabric Interconnects

Which statement is true regarding the UCS Manager GUI is showing "Overall Status Unassociated" in the General tab for a C-series server?

A. The server has a service profile assigned, but has connectivity issues with UCS Manager

B. The server is not properly connected

C. The server does not have a service profile assigned, but has been discovered by UCS Manager

D. The server has been properly connected, but has not been discovered by UCS Manager

The command show interface veth 705 is telling you that the bound interface is Ethernet 3/1/2

What is the location of the blade that has veth 705 associated to it?

A. Chassis 3, Slot 1

B. Chassis 3. Slot 2

C. There is not enough information

D. Chassis 1. Slot 2

After performing a UCS firmware upgrade, which two UCS components will require updated drivers? (Choose two )

A. VIC Cards and Fiber Channel HBAs

B. Cisco Fabric Interconnects

C. Cisco UCS Manager

D. RAID Controllers

Which ethernet port type is used when configuring UCS Fabric Interconnect connections to Cisco UCS C-series servers?

A. Server Port

B. Uplink Port

C. Direct Connect Port

D. Service Profile Port

Which two interfaces allow access to Cisco UCS Manager? (Choose two )

A. Cisco KVM

B. Cisco UCS Manager XML API

C. Cisco IMC

D. Cisco UCS Manager GUI