C4090-454 Online Practice Questions and Answers

In a TS3500 with ALMS enabled, which task can be completed by using the operator panel only, but not by using the Tape Library Specialist Web interface?

A. Create or remove a logical library

B. View or change the preferred zone of an accessory

C. Disabling or changing the speed of the Ethernet link

D. Installing licensed features of the library such as capacity on demand

An existing TS7740 customer has chosen to upgrade with additional 200 MB/sec Enablement and 7 TB Tape Cache. Which of the following is the best business objective on the above upgrade?

A. The customer would like to improve OLTP application response time

B. The customer would like to improve the RTO (Recovery Time Objective)

C. The customer would like to improve the RPO (Recovery Point Objective)

D. The customer would like to improve the tape backup jobs processing time

A banking customer's TS7740 was unable to replicate the tape backup data to the DR data center via the current grid network. The IBM support engineer had created a PMR with Severity 1 because the tape library is supporting the customer's production environment. Six hours after the PMR was created, IBM Level 2 support requested to change the Severity Level to 2, even though the problem had not been resolved. Based on IBM guidelines, why would this problem need to be reduced to Severity 2?

A. Severity 1 only applies to Tape Faillure

B. Severity 1 only applies to Network Failure

C. Severity 1 only applies to Production Failure

D. Severity 1 problem must be resolved within 6 hours

To install an IBM 3592-007 with attached drives housed in a TS3500 Tape Library, which of the following is required?

A. TS3500 frame with mountings to install the 3592-007 and its switches

B. Customer-supplied standard rack using switches in one of the TS3500 frames

C. IBM 3953 frame with switches installed either in 3953 frame or one of the TS3500 frames

D. IBM 3952 frame with switches installed either in 3952 frame or one of the TS3500 frames

A newly installed TS7720 Virtualization Engine has recently been integrated into a three-way grid. The logical volumes created in the other two systems are not properly being replicated to the new system. All local IBM and customer support resources have been exhausted in trying to determine the cause with no resolution in sight. What should be the next step to try to resolve the issue via IBM?

A. Contact local PSR to escalate

B. Contact the local SSR to escalate

C. Contact the sales representative to escalate

D. Contact the local software provider to escalate

A proposed design includes a TS7700 and one 3952 frame with three installed 3592- 007 tape controllers. What is needed to provide high availability library management for the native tape drives in the TS3500?

A. Logical library option P04444 in the first two 007s

B. Logical library option P04444 in the first three 007s for n-i availability

C. No additional library management features required in the 007 as the function is provided in TS7700

D. Logical library option P04444 in the first three 007s which also provides library management for the TS7700

A customer has replaced an old virtual tape subsystem with a new TS7740 and would like to compare the batch run times before and after the change. What tool is available in IBM Tape tools to do this?

A. VEHSTATS

B. IOSTATS

C. TAPEWISE

D. Batch Magic

A customer has TS1120 tape drives used with an inventory of 200 JA cartridges and 200 JB cartridges, all currently written by the TS112O drives at the highest density format. The customer plans to install TS1140 drives and move the data to new JO cartridges. How many new JC cartridges are required? Assume all cartridges are full to capacity, and round up the answer to the nearest cartridge if required.

A. 50

B. 60

C. 75

D. 82

Which resource typically contains product installation and planning checklists?

A. IBM Redbooks

B. IBM White Papers

C. Product Operations Guide

D. Solutions Assurance Product Review Guides

What is the minimum requirement for a TS7740-V06 to run release 2.0 microcode?

A. 16GB memory installed

B. at least 7 TB cache enabled

C. TS1140 drives installed at the backend

D. at least 200 MB/s processing increments enabled