DES-DD23 Online Practice Questions and Answers

DRAG DROP

What is the correct sequence of steps to configure storage for Dell EMC Cloud Tier in the DD System Manager?

Select and Place:

When using CIFS from a PowerProtect DD system, what should be changed on a Windows machine?

A. SMBTimeout to 7200 seconds

B. CIFSTimeout to 3600 seconds

C. SESSTIMEOUT to 7200 seconds

D. SESSTIMEOUT to 3600 seconds

A technician is upgrading a DD9400 with a DS60 expansion shelf with 60 drives. In the GUI interface, only 30 drives are accessible. What is causing these drives to be inaccessible?

A. There are not enough cache drives on the DD9400 to support the extra capacity.

B. A second SAS connection from DD9400 to DS60 is not activated.

C. There are not enough spare drives.

D. The capacity license applied is only for 30 drives.

An administrator is migrating their old cloud tier-enabled Data Domain to a new PowerProtect DD appliance with cloud tier. During migration, the administrator recognizes that file system cleaning on the source system is not possible. What is the most likely cause of this behavior?

A. Migration will restrict all activities on source systems.

B. Migration will restrict all activities on both systems.

C. Filesystem is disabled on source system.

D. Source system is running in restricted mode.

Which of the following protocols are supported by PowerProtect DD for data movement to a cloud provider?

A. CIFS and NFS

B. FTP and FTPS

C. VTL and DD Boost

D. HTTP and HTTPS

A customer needs to use DD Retention Lock Compliance to ensure that data integrity is maintained.

Which PowerProtect DD systems meet the customer's requirement?

A. DD3300, DD6900, and DD9400

B. DDVE, DD3300, and DD6900

C. DD6900, DDVE, and DD9400

D. DD9400, DDVE, and DD9900

What are some possible network bottlenecks for a PowerProtect DD?

A. Configuration, wire speeds, switches and routers

B. Connectivity, routing protocols, and configuration

C. Connectivity, firewalls, and routing protocols

D. Routing protocols, switches and routers, and wire speeds

A backup administrator is tasked with verifying the compression savings of a PowerProtect DD9900.

Which compression algorithm will they see enabled by default?

A. lzw

B. gzfast

C. lz

D. gz

Which port/protocol is used when using a syslog server to monitor a PowerProtect DD system?

A. 514/UDP

B. 2051/TCP

C. 514/TCP

D. 2051/UDP

An engineer is deploying two PowerProtect DD6900 systems in an HA pair. The installation includes ES40, DS60, and FS25 expansion shelves. What consideration should be made when cabling the hardware?

A. The FS25 shelf must be fully populated

B. The FS25 shelf should be cabled on a separate chain

C. The DS60 shelf should be cabled on a separate chain

D. The DS60 shelf must be populated with identical drives