HP2-Z32 Online Practice Questions and Answers

What should match on HP MSM Controllers in order for the team to form properly?

Hot Area:

Match each description to the appropriate extensible authentication protocol (EAP) type.

Hot Area:

Hot Area:

A network administrator deploys several HP MSM APs and an HP MSM Controller. The APs discover the controller, establish management tunnels, and become synchronized. The administrator wants to check some settings on one of the

APs and attempts to reach its web browser interface, but the request times out.

However, a ping to the AP succeeds.

What explains this behavior?

A. The global setting for controlled AP provisioning is disabled.

B. The APs' Web interfaces are not available after they become managed by the controller.

C. The APs' Web management tool features have been disabled either at the AP group level or the controlled AP level.

D. The controller has deployed an access control list (ACL) to the AP. The management station's address must be added to this list.

The MSM APs are deployed on a separate subnet from the controller and network administrators want to set up Layer 3 DHCP discovery. How will the MSM APs find the MSM Controller?

A. A vendor option in the DHCP scope lists one or more controller IP addresses.

B. The MSM Controller sends unicast messages to the MSM APs.

C. Once the APs receive an IP address from the DHCP server, they broadcast UDP discovery messages.

D. The MSM Controller is configured as the MSM APs' default gateway, allowing APs to send a discovery request to the MSM Controller

Which 802.11n technology involves a radio transmitting the same data on more than one antenna'?

A. channel bonding

B. band steering

C. multiple spatial streaming

D. transmit beam forming

The 802.11n radio in one AP supports three spatial streams. The 802.11n radio in another AP supports two spatial streams.

What is one benefit of the first AP radio over the second AP radio?

A. Each spatial stream carries a separate stream of data, increasing bandwidth.

B. Each spatial stream operates on a slightly different frequency, increasing reliability and resilience to interference.

C. Each spatial stream carries the same stream of data, increasing reliability.

D. Each spatial stream can be directed toward a different client, increasing the bandwidth for more clients.

How does 802.11h (DFS) help 802.11 devices avoid interference?

A. The standard enables 802.11n APs to switch channels when they encounter any interference on any channel in the 5.0 GHz range. It offers no benefits for non-n devices.

B. The standard ensures that 802.11 devices do not interfere with other non-802.11 devices that use the 2.4 GHz range.

C. The standard ensures that 802.11 devices operating in the 5 GHz (UNII2-UNII2e) frequency range do not interfere with radar.

D. The standard enables 802.11g and 802.11n devices to switch channels when interference causes the SNR to drop below the minimum level.

When configuring the MSM controller for a controlled mode network, at which point is the AP's VSC egress VLAN configured?

A. When the Group is created

B. When the AP is synchronized with its Group

C. When the specified VLAN is created

D. When the VSC is bound to the Group

A company has an HP MSM solution that consists of an HP MSM760 Access Controller and controlled HP MSM317 Access Devices.

The solution supports a VSC that enforces HTML-based user login (Web-Auth) using the `s internal login pages. Controller The company wants to customize these pages.

What are the correct guidelines for the customization?

A. The Web designer can change the text and images and add new pages. However, the designer must not change the existing ASP code or add any new scripts.

B. The Web designer can change the text and images and change the logo image. If the company requires more customization, the company should host the pages on an external Web server.

C. The Web designer can change the text and images and add new script and pages. However, the existing ASP code should generally be left intact.

D. The Web designer can change the text and images. However, the designer must not change the existing ASP code or add any new scripts.

A company wants to authenticate wireless users to user accounts configured on the MSM Controller. Which settings must be defined in the VSC for those users? (Select two.)

A. HTML-based authentication must be enabled.

B. Use the controller for authentication must be enabled.

C. Use the controller for access control must be enabled.

D. 802.1X authentication must be enabled.

E. The authentication method (any type) must be set to Local.