HP2-Z33 Online Practice Questions and Answers

What are the process steps that occur for a guest to access a wireless network managed with an HP BYOD solution? (Place the steps in the correct order.)

Hot Area:

An organization wants to upgrade their wireless network to allow employees to connect using their 802.11ac enabled devices. Which HP access points meet this requirement?

A. HP 425

B. HPMSM466

C. HP MSM430

D. HP 560

A network administrator configures 802.1X authentication on a wireless network set with an HP 830 Unified Wired-Wireless Controller. The administrator configures a RADIUS scheme named radius1 and a Domain scheme name domain1. Which other configuration will enable 802.1X?

A. Option A

B. Option B

C. Option C

D. Option D

An organization implements an N+1 redundancy for its access controllers (ACs). When the primary AC fails, the access points (APs) successfully fail over to the standby AC. However, when the failed AC comes back in to service, the APs do not switch back to the original AC.

What could cause this to happen?

A. AP Connection priority on the primary AC is not set to 1.

B. APs determine which AC to connect to based on load.

C. APs do not fail back to the original AC.

D. AP Connection priority on the primary AC is not set to 7.

Refer to the exhibit.

A. The access controller should send the access point (AP) an echo request every 10 seconds to ensure that the AP is still operational.

B. The access point should send the access controller an echo request every 10 seconds to ensure that the LWAPP tunnel is up.

C. The access point should transmit a beacon every 10 seconds.

D. The access point should send the client an echo request every 10 seconds to ensure that the client is still connected.

When does DHCP fingerprinting of endpoints occur within an HP BYOD solution?

A. when User Access Manager validates the user account

B. when endpoints access the BYOD registration page

C. when endpoints obtain an IP address

D. when endpoints are authenticated

A network administrator configures an HP BYOD solution. To authorize guests to register their endpoints, the network administrator sets up components of the Onboarding process. Which configuration settings must the administrator set up in User Access Manager?

A. Option A

B. Option B

C. Option C

D. Option D

Which command allows an administrator to access the HP 830 switch CLI from the controller?

A. oap management-ip 192.168.0.101 module 1

B. oap connect slot 0

C. oap management-ip 192.168.0.101 slot 1

D. oap connect module 0

Which action can a guest manager perform?

A. Manage accounts of other guest managers.

B. Create but not delete guest accounts.

C. Set up corporate users as guests in the self-service page.

D. Extend the lifetime of guest accounts.

In an HP BYOD solution, which settings are required in order to allow guest users to access the BYOD registration page? (Select two.)

A. User Access Manager Access Condition on the VLAN group that selects the GUEST VLAN

B. User Access Manager Access Policy that defines user authentication

C. User Access Manager Access Policy that returns Onboarding VLAN

D. Portal free rule that enables DNS to be forwarded from onboarding VLAN interface to DNS server

E. Portal server commands that block HTTP traffic from being forwarded