HPE0-J58 Online Practice Questions and Answers

DRAG DROP

A customer has a primary site with an HPE Nimble Storage array and a secondary site with another HPE Nimble Storage array. The customer had a planned power outage at their primary site, and now needs to switch back to the primary

array.

Place the steps into the order they must be performed to switch back the primary array.

Select and Place:

A customer needs to setup specific replication bandwidth requirements to limit the bandwidth between HPE Nimble Storage replication partners, which is different than the bandwidth requirements to another Replication Partner. Which Bandwidth parameter should the customer use?

A. Array-to-array Limit

B. Per-partner limit

C. Partner Maximum limit

D. Overall limit policy

A customer has started to load their HPE 3PAR 8450 with data, but are not sure what data reduction they are achieving. They ask you to run analysis and estimate the deduplication ratio of data currently on a virtual volume (VV). Which CLI command should you use to understand data reduction ratios?

A. showvv

B. tunevv

C. convertvv

D. checkvv

A customer needs to new storage solution, including replication. The replication solution does not need to provide an RTO or RPO of zero.

The customer suffers from severe VM sprawl and has experienced unidentified storage service-level degradations.

What should you point out during your presentation of the solution?

A. Hardware-assisted parity generation and deduplication mitigate the changing performance requirements

B. VMs are always individually visible to the array with automatic enablement of VVOL technology

C. InfoSight and VM details would help in identifying misbehaving VMs putting a high load on the array

D. When a storage system is being overloaded, the replication software will automatically move the workload

A customer has recently acquired another company that is located less than 3 km from their current main location. Both locations use HPE B-Series products in their storage environment. The customer needs to merge the 2 locations together

while still using the current WAN and networking infrastructure at both locations. They need to keep their initial cost down until they are able to redesign both networking infrastructures.

Which protocol should be incorporated when providing a proposal to meet the customer needs?

A. ISCSI

B. CWDM

C. DWDM

D. FCIP

A customer needs to replicate the data on their HPE 3PAR arrays between their datacenters. Their datacenters are 250km apart. The link between the sites has an RTO of 100 ms, and they have an RPO of 3 minutes. Which replication method should you recommend to meet the customer needs?

A. RCIP is Synchronous mode

B. RCFC is Synchronous mode

C. RCIP in Asynchronous Streaming mode

D. RCFC in Asynchronous Periodic Mode

A customer needs to replace their outdated storage arrays.

Which resource provides the necessary information to properly size a solution?

A. HPE NinjaCrawler

B. HPE Ninja Stars for Nimble

C. HPE Storage Sizer

D. HPE Storage Assessment Foundry

An HPE Nimble customer needs to consolidate storage and scale performance. They are looking to purchase additional hardware to meet these requirements. What is the best solution to offer this customer?

A. Add additional SSDs to the cache

B. Use multiple single-array storage pools

C. Add additional HBAs in the arrays

D. Use multi-array storage pools

A customer wants to enable an automated failover for their two existing HPE 3PAR solutions, which are located in two different sites. Each solution has an All-inclusive Single-System Software license. Which component is required to enable this function?

A. All-inclusive Multi-System Software License

B. Fibre channel Bridges to connect the disk shelfs

C. Additional HPE 3PAR system as quorum witness

D. Dark fibre connection between the sites

What is one of the advantages of protecting HPE 3PAR File Persona with RMC?

A. MS SQL data consistency is provided

B. Single file recovery is possible

C. Transparent failover is offered If clients are using SMB 3.0, even if you recover to another 3PAR

D. Backup throughput will be considerably faster than other backup methods