A customer has a small branch office that requires a tower-based server solution. The customer runs office-based applications and wants lights-out management capability. Which HPE server family meets the customer's needs?
A. ProLiant ML
B. ProLiant DL
C. ProLiant BL
D. ProLiant MicroServer
A company needs a solution that provides SMB and NFS file shares. The solution must have a built-in data backup to Microsoft Azure. Which HPE solution meets the customer's needs?
A. StoreOnce 3520
B. StoreEasy 1000
C. StoreOnce VSA
D. StoreVirtual VSA
You are configuring an internal Smart Array controller on an HPE ProLiant server. Which statement is true regarding the drives in the logical array?
A. HDDs and SSDs cannot be mixed in the same logical array.
B. SATA HDDs and SAS SSDs can be mixed in the same logical array.
C. SAS HDDs and SATA HDDs can be mixed in the same logical array.
D. SATA SSDs and SATA HDDs can be mixed in the same logical array.
You have completed a non-disruptive activation of firmware on an SN6000 switch. Which session must be restarted manually?
A. Enterprise Fabric Management Suite session
B. telnet session
C. SAN connection Manager session
D. QuickTools session
You are installing HPE ProLiant servers into a rack that will be fully loaded. You also need to install four power distribution units (PDUs) in the rack. How should you install the PDUs to maximize power distribution and space efficiency?
A. at the top of the rack with the cables running between the RETMA rails
B. horizontally on extension bars mounted directly to the frame for improved clearance
C. in the bottom bay of the rack with the outlets facing the front
D. vertically, side by side on both sides of the rack with the outlets facing the center
A customer needs to enable HPE Proactive Care and automated case creation for server hardware failures in their OneView environment. Which step do you need to complete in OneView to accomplish these tasks?
A. Enable remote support from the Settings page.
B. Apply the OneView Advanced monitoring license.
C. Add the hosts to the managed devices group.
D. Configure proactive scan reports.
You are troubleshooting a customer's HPE ProLiant rack-mount server. The customer has configured the server in Legacy Boot BIOS Mode and is trying to boot from a USB 3.0 drive. The server will not boot from the drive. What should you do?
A. Set the USB 3.0 mode to Enabled.
B. Set the USB 3.0 mode to Auto.
C. Use the internal USB 3.0 connector.
D. Use the front-facing USB 3.0 connector.
A customer needs to improve throughput performance of iSCSI traffic on their Layer 2 switch. Which feature should the customer implement at the switch level?
A. Jumbo frames
B. Oversubscription
C. SMB Direct
D. Remote Data Memory Access
Which HPE service level offers customers special parts handling and access to onsite service 24x7, including HPE holidays?
A. Proactive Care 24x7
B. Proactive Care 24x7 with CTR
C. Foundation Care 24x7 with DMR
D. Foundation Care 24x7
A customer is enhancing their server and storage virtualization infrastructure. They need to maximize memory density per rack unit and provide an all-flash array to the environment. Which HPE solutions should they install to fulfill these requirements (Select two.)
A. Nimble AF3000
B. ProLiant ML350 Gen10
C. ProLiant ML360 Gen10
D. ProLiant ML380 Gen10
E. MSA 2042