HPE0-S58 Online Practice Questions and Answers

HOTSPOT

A customer discovered performance issues with one of the volumes used by an application.

An integrator recommended changing the RAID level for this volume from RAID6 to RAID5 by moving this volume to a different CPG.

Click the option that will start this operation.

Hot Area:

What are valid uses for an IPv4 address pool when configuring an HPE Synergy solution? (Choose two.)

A. assignment of IP addresses for NICs in an operating system

B. assignment of IP addresses for Composer appliances

C. assignment of IP addresses for PXE booting to a deployment server

D. assignment of IP addresses for interconnect modules

E. assignment of IP addresses for iLOs

A customer needs to expand a single-frame Synergy solution to two frames.

What should the integrator do to establish a proper management network for the two frames?

A. Connect the RJ-45 management ports of the Virtual Connect modules together with redundant CAT6A cables.

B. Disconnect the existing management ring, and cable the Frame Link Modules in the first frame to the Frame Link Modules in the added frame.

C. Connect the RJ-45 front panel connectors on the two frames together with a single CAT6A cable.

D. In the Synergy console, select the Frame Link Modules in the new frame and define the connection between them.

A customer wants to expand their existing cluster using the Grow Cluster functionality from OneView for vCenter Server. Which OS build plan managed by HPE OneView for vCenter Server can the customer use?

A. ICsp-Based Deployment

B. iLO Federation-Based Deployment

C. Image Streamer-Based Deployment

D. PXE-Based Deployment

A customer with a 3-frame Synergy composable infrastructure has received a second rack to expand existing composable infrastructure resource pools. The integrator has cabled the management ring as shown. Which steps should the integrator take to increase availability of this configuration (Choose two.)

A. Move on Composer to Rack 2

B. Move both Composers to Rack 2

C. Enable multi-rack high availability in HPE OneView

D. Move both management uplinks to Rack 2

E. Move one management uplink to Rack 2

Refer to the exhibit.

A Synergy integrator needs to establish the module cluster links between two master modules, as shown. Which ports can the integrator use for the module cluster links?

A. 1 and 2

B. 3 and 4

C. 5 and 6

D. 7 and 8

A customer needs a Synergy solution to meet the following requirements: Acts as a master module in a multiple frame logical fabric Provides advanced Ethernet switching features Managed by the network team Supports 10Gb downlinks to compute modules 40Gb uplinks to core switches

Which interconnect module should the integrator use?

A. Mellanox SH2200 Switch Module

B. HPE Synergy 10Gb/40Gb Pass-Thru Modules

C. HPE Synergy 40Gb F8 Switch Module

D. HPE Virtual Connect SE 40Gb F8 module for HPE Synergy

A customer has a five-frame Synergy deployment with redundant Composers. An integrator needs to install Image Streamer. What must the integrator consider before taking the planned action?

A. Image Streamer requires the use of the MGMT port from both of the FLMs in the frame where the Image Streamer appliance is installed

B. The frame where the Image Streamer is being installed must not contain an Interconnect Module

C. The location of the Image Streamer must be manually modified through the Composer

D. A connection to the management network must be established to an FLM in the same frame that houses the Image Streamer

An integrator needs to set up three Synergy Frames. All three frames are equipped with two HPE Synergy Virtual Connect SE 40Gb F8 modules. How many frames must the integrator select in the Enclosure Group?

A. 02 frame link modules

An integrator is performing an initial Synergy setup.

How should the integrator initiate the hardware discovery?

A. Connect a Serial cable to the front panel, and open a session to the console

B. Plug in the SUVi cable for the blade server, and attach a monitor

C. Open a browser, and select Discover in the HPE Synergy Console

D. Attach a display and a keyboard to the front panel, and click connect