HP HPE6-A48 Exam Questions & Answers

Refer to the exhibits. Exhibit1

Exhibit 2

Based on outputs shown in the exhibits, what is the reason that AP12 is seen by two different controllers?

A. AP12 connects to a high availability group. MC1 is the active controller, and MC11 is the standby controller.

B. AP12 is a multizone AP. MC1 is part of the primary zone, and MC11 is part of the datazone.

C. AP12 connects to an MC cluster. MC1 is the A-AAC, and MC2 is S-AAC.

D. AP12 is in the middle of the boot process. MC1 is the master IP controller, and MC11 is the LMS IP controller.

A software development company has 700 employees who work from home. The company also has small offices located in different cities throughout the world. During working hours, they use RAPs to connect to a datacenter to upload software code as well as interact with databases.

In the past two months, brief failures have occurred in the 7240XM Mobility Controller (MC) that runs ArubaOS 8.3 and terminates the RAPs. These RAPs disconnect, affecting the users connected to the RAPs. This also causes problems with code uploads and database synchronizations. Therefore, the company decides to add a second 7240XM controller for redundancy.

How should the network administrator deploy both controllers in order to provide redundancy while preventing failover events from disconnecting users?

A. Connect both controllers with common VLANs, and create an L2-connected cluster using public addresses in the internet VLAN.

B. Connect both controllers with common VLANs, and create an HA fast failover group with public addresses in the internet VLAN.

C. Connect both controllers with different VLANs, and create an L2-connected cluster using private addresses in the internet VLAN.

D. Connect both controllers with common VLANs, and configure LMS/BLMS values equal to public addresses in the internet VLAN.

Refer to the exhibit.

A network administrator wants to configure an 802.1x supplicamt for a wireless network that includes the following: AES encryption EAP-MSCHAP v2-based user and machine authentication Validation of server certificate in Microsoft Windows 10

The network administrator creates a WLAN profile and selects the change connection settings option. Then the network administrator changes the security type to Microsoft: Protected EAP (PEAP), and enables user and machine authentication under Additonal Settings.

What must the network administrator do next to accomplish the task?

A. Enable user authentication under Settings.

B. Change the security type to Microsoft. Smart Card or other certificate.

C. Enable server certificate validation under Settings.

D. Enable computer autentication under Settings.