HPE6-A66 Online Practice Questions and Answers

When a WLAN has to support nomadic devices, a network architect must primarily plan for which component in their design?

A. type of users

B. number of users per location

C. mobility requirements and usage

D. density of users

A customer has some employees that travel to various locations, where these employees will need Wi-Fi access at these locations. Because many of these locations do not have wireless support, the employees will need to carry an AP

solution with them. Internet connectivity, if it doesn't exist at these locations, will be provided by a national phone company USB wireless card which will be connected to AP. The wireless solution needs minimal bandwidth, but needs to

minimally support 802.1 lac wave 1 devices.

Which Aruba AP wireless solution would meet the needs of these employees most effectively and cost efficiently?

A. 318

B. 303H

C. 365

D. 203R

NewStellar has a main corporate campus in a business park with two adjacent buildings. Each building has three floors and each floor is 322 x 175 feet (98 x 53 meters) for 56,350 square feet (5,235 square meters) total. The ceiling for each floor is 12 feet (3.6 meters) high with a dro This floor has a central main corridor with washrooms, stairs, elevators and supply and network cabinets. There are cubicles around the perimeter of the floor. The central part main corridor's dimensions contain 9,350 square feet (870 square meters). Assuming that wireless coverage is not required in the central area, which square footage (square meter) value should a network architect use when determining the number of APs in a capacity design for each floor?

A. 55.750 square feet {5,175 square meters)

B. 56.350 square feet {5,235 square meters)

C. 47.000 square feet {4,365 square meters)

D. 338,100 feet {31,410 square meters)

A customer is purchasing Aruba 555 APs for a new wireless network. The APs will be pre-staged as campus APs (CAPs) and be managed by a controller solution During the pre-staging process, console access to the APs might be

necessary.

Which console connection cable should the customer purchase for the 555 APs?

A. RJ-45

B. RS-232

C. USB-A

D. Micro-B USB

A company needs to replace an existing legacy wireless and wired solution with one that supports features like 802 11 ax for APs and logical switching for switches. The company is located on a single floor with two wiring closets. Assume that there will be 10 APs connected via POE+ to each wiring closet, along with 36 wired user connections All switches on a floor should be configured in a single stack. The distance between wiring closets is 100 feet (31 meters). Which switching solution will minimally provide 10 Gbps uplinks at the most cost-effective price, while still meeting the company's requirements?

A. 2930M switches

B. 2930F switches

C. 5406R switches

D. 3810M switches

A network architect plans to use two ArubaOS 5406 switches in a wiring closet configured in a VSF domain The VSF link requires a 40 GDps connection. Which SFP+ transceiver solutions would meet this requirement?

A. QSFP+ LC

B. SFP

C. SmartRate

D. QSFP28

A network architect is designing a new Wi-Fi solution for a customer The customer currently occupies a one-story building on a small campus. In one part of the building there is an auditorium, where the ceiling height and attenuation is different from the rest of the building. What should the network architect create in VisualRF to identify this difference when planning :ne APs?

A. Define the appropriate properties in the Network View

B. Create a Region in the Floorplan View

C. Spit the Building View into two Floorplan Views

D. Define the appropriate properties in the Building View

Which type of Aruba AP uses its radio as its back-haul connection?

A. Mesh Point

B. Mesh Porta

C. Air Monitor (AM)

D. Remote AP (RAP)

A network architect is doing a site survey for a new wireless design One concern the company has with the old wireless network is coverage. In some cases, APs would lose power and some employees in the network would lose wireless connectivity. The new design needs to prevent this issue from occurring. During the site survey, what are best practices to be followed in regards to the dBm signal level and the power of the AP to ensure adequate wireless coverage and minimal overlap of AP signals for the new design?

A. AP power at 75% and a measurement of -90 dBM on the measuring device

B. AP power at 100% and a measurement of -65 dBM on the measuring device

C. AP power at 75% and a measurement of -80 dBM on the measuring device

D. AP power at 50% and a measurement of -65 dBM on the measuring device

A company has hired a network architect to replace an existing legacy wireless and wired network The building is one-story and contains four wiring closets Based on the information the network architect gathered from the company, one 48port POE+ switch and three 48-port non-POE+ switches will be placed in each wiring closet. One stacking domain should be created for each wiring closet that supports 40 Gbps uplinks.

Which stacking solution should the architect implement for the floor that meets the requirements and is the most cost-effective'?

A. VSX

B. VSF

C. Backplane stacking

D. Distributed trunking