NS0-527 Online Practice Questions and Answers

Click the Exhibit button.

In an ONTAP environment, an SVM-DR relationship exists between your AFF A220 cluster and your FAS2720 cluster, with identity preserve enabled. You are asked to test thedisaster recovery workflow in an upcoming maintenance window. Referring to the exhibit, which step should be performed next to test the recovery workflow?

A. Delete the SVM-DR relationship.

B. Pause any ongoing transfers.

C. Abort any ongoing transfers.

D. Update any ongoing transfers.

A customer has just purchased a new 2-node AFF A220 cluster running ONTAP 9.7 and moved the older 4- node FAS2650 cluster running ONTAP 9.5 to an off-site location. They want to configure replication to the FAS2650 cluster for both disaster recovery and long- term archiving.

In thisscenario, how would the customer accomplish this task?

A. Upgrade the FAS2650 cluster to ONTAP 9.7, then configure SnapMirror with type TDP.

B. Leave the ONTAP versions, then configure SnapMirror with type XDP.

C. Downgrade the AFF A220 cluster to ONTAP 9.5, then configure SnapMirror with type XDP.

D. Leave the ONTAP versions, then configure SnapMirror with type DP.

Click the Exhibit button.

Your customer has recently implemented a FabricPool solution that uses the default configuration. They notice that no data has moved to the cloud tier. Your customer is concerned that FabricPool might not be functioning properly. Referring to the exhibit, what is causing the problem?

A. The performance tier is not 50% full.

B. The performance tier is not 90% full.

C. The performance tier is not 75% full.

D. The performance tier is not 100% full.

You experience a node outage as a result of a component failure in a high-availability (HA) pair. You replace the failed component and get thenode booted up again, but are unable to perform the giveback operation. The onscreen error is:

"Connected to partner, Takeover is not possible: Storage failover mailbox disk state is invalid, Local node has encountered errors while reading the storage failover partner's mailbox disks. Local node missing partner disks"

What are two ways to solve this problem? (Choose two.)

A. Correct the shelf cabling errors.

B. Destroy the root aggregate.

C. Correct the failover group configuration.

D. Destroy the mailboxes on both nodes.

You must manually upgrade your company's 8-node cluster from ONTAP 9.5 to ONTAP 9.7. Due to the sensitivity of the data that is being stored on the cluster, it is company policy to perform these upgrades one node at a time. What are two steps that you must perform to accomplish this task? (Choose two.)

A. Terminate active NFS connections.

B. Move Epsilon to maintain cluster quorum.

C. Terminate active SMB connections.

D. Change disk ownership.

When installing a new AFF A700s, you notice thatthe HA interconnect adapters use miniSAS HD. You subsequently consult Hardware Universe to find out that only 0.5M cables are supported. Due to the importance of the system data fields

that use this link, you delay the installation until you can acquire 0.5M cables.

In this scenario, which two system data fields are communicated between HA pairs over the interconnect adapters? (Choose two.)

A. NVRAM mirroring

B. heartbeat signal

C. intercluster peering

D. data LIF location

You have a SnapMirror relationship established between two sites and want to verify that the data on the DR site is usable without disturbing the source. In this scenario, which three steps are required to accomplish this task? (Choose three.)

A. Resynchronize the destination to the source volume, then update the source volume.

B. Resume the SnapMirror destination, then updatethe SnapMirror destination.

C. Quiesce the SnapMirror destination, then break the SnapMirror destination.

D. Reverse the SnapMirror source and destination, then re-initialize SnapMirror.

E. Configure the destination volume for data access, then access thedata volume from a client.

You have an environment with multiple database servers that are performing scheduled nightly dumps. These dumps vary in both the time to complete and the size of data produced. Youneed to ensure that there is always enough room in the

volume for the data and that a nightly SnapMirror update does not take place until the database dump process is complete.

In this scenario, which NetApp tool ensures that this process is completed every night?

A. OnCommand Unified Manager

B. OnCommand Insight

C. OnCommand Workflow Automation

D. OnCommand System Manager

You want to use a Fabric Pool to store destination SnapMirror data to an external capacity tier. Which tiering policy would be used inthis scenario?

A. auto

B. snapshot-only

C. none

D. backup

A FAS2750 cluster administrator experiences network issues during replication updates that pass over a low- bandwidth WAN link to their DR site. They also replicate locally to another cluster for testing and development. The administrator wants to enable network compression only on the existing WAN Link SnapMirror jobs.

In this scenario, which statement is correct?

A. Network compression must be enabled when initializing the replica, the current jobs need to be deleted and new ones created.

B. Network compression is a global option and it cannot be used.

C. The current DR transfers must be aborted and the option enabled on each job, then resume the transfer.

D. Network compression ispossible but not on a FAS2750.