VMware 2V0-41.23 Exam Questions & Answers

Correct Answer: BD

To check the IP address of the VMkernel port for the Geneve protocol on the ESXi transport node, an NSX administrator can use the following commands: esxcli network ip interface ipv4 get: This command displays the IPv4 configuration of all VMkernel interfaces on the host, including their IP addresses, netmasks, and gateways. The Geneve protocol uses a VMkernel interface named geneve0 by default1 esxcfg-vmknic-l: This command lists all VMkernel interfaces on the host, along with their MAC addresses, MTU, and netstack. The Geneve protocol uses a netstack named nsx-overlay by default

https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.2/installation/GUID-B7E7371E-A9F6-4880-B184-E00A62C0C818.html https://www.vmadmin.co.uk/resources/35-esxserver/49-vmkniccmd

Correct Answer: DE

According to the VMware NSX Documentation, these are the prerequisites for adding nodes to an NSX Management Cluster using the NSX UI:

All nodes must be in the same subnet and have IP connectivity with each other. A compute manager must be configured and associated with the NSX Manager node.

The NSX Manager node must have a valid license.

The NSX Manager node must have a valid certificate.

Correct Answer: D

To activate Malware Prevention on the NSX Application Platform, the steps are:

In the NSX Manager UI, select System and in the Configuration section, select NSX Application Platform.

Navigate to the Features section, locate the NSX Malware Prevention feature card, and click Activate or anywhere in the card.

In the NSX Malware Prevention activation window, select one of the available cloud regions from which you can access the NSX Advanced Threat Prevention cloud service.

Click Run Prechecks. This precheck process can take some time as the system validates that the minimum license requirement is met and that it is eligible for use with the NSX Advanced Threat Prevention cloud service. The system also

validates that the selected cloud region is reachable. Click Activate. This step can take some time1. Therefore, the correct answer is D. The other options are incorrect because they involve activating or deploying NSX Network Detection and

Response, which is a different feature from Malware Prevention. References: Activate NSX Malware Prevention