HP HPE6-A75 Exam Questions & Answers

Refer to the exhibit.

Several interfaces on an AOS-Switch enforce 802. IX to a RADIUS server at 10.254.378.521. The interface

802. IX settings are shown in the exhibit, and 802. IX is also enabled globally. The security team have added a requirement tor port security on the interfaces as well. Before administrators enable port security, which additional step must they complete to prevent issues?

A. Set an 802. l X client limit on the interfaces.

B. Manually add legitimate MAC addresses to the switch authorized MAC list.

C. Enable eavesdropping protection on the interfaces.

D. Enable DHCP snooping on VLAN 20.

A network administrator wants to use Aruba AirWave to audit an AOS-Switch configuration. What rs one requirement?

A. The switch defines the AirWave IP address in its zero touch provisioning (ZTP) profile.

B. The switch specifies the AirWave IP address for the RADIUS server used for Telnet and SSH authentication.

C. The switch is authorized in AirWave, which has the correct credentials to log in as a CLI manager.

D. The switch is set to Manage Read-Write mode in AirWave but is not set to Monitor Only + Firmware Updates.

OSPF is configured on an AOS-Switch, and the network administrator sets the router ID to 10.0.0.1. The administrator wants to be able to reach the switch at this ID from any location throughout the OSPF system. The administrator also needs the router ID to De stable and available, even if some links on the switch fail.

What should the administrator do?

A. Make sure that 10.0.0.1 is the IP address on the VLAN with the lowest ID.

B. Configure 10.0.0.1 on a loopback interface, and enable OSPF on that interface.

C. Configure 10.0.0.1 as a manual OSPF neighbor on each switch in the OSPF system.

D. Configure 10.0.0.1 as a secondary IP address on the switch 00BM poet.